Anti-wear hydraulic oil and transmission oil additive package BF3000

Description

This product with high performance, less dosage, multi-purpose, fully able to meet the anti-wear hydraulic, hydraulic transmission oil requirements.


Recommended Dosage

The recommended dosage is 0.8-1.5%


Typical Characteristics


Item

Typical Value

Test Methods

Appearance

Yellow to light brown transparent liquid

Visual inspection

Density ,20℃,g/cm3              

1.1-1.2

GB/T1884

Viscosity,40℃mm2/s            

≥60

GB/T265

Flash points,℃               

≥180

GB/T207

Phosphorus content,%                  

≤ 6

SH/T0296

Sulfur content,%                  

≤8

SH/T0303

Zn content,%                  

≤5.0

SH/T0226

Nitrogen content,%                    

Trace

SH/T0224


Packing:The product is packed in 200 liter drum. (net weight: 200Kg/drum).

Storage

1.The best blend temperature is 60 ~ 70 ℃

2.Beforemixed with other additives, it must be tested.

3.Inwinter, not to usetofireto heat it directly.

4.Sealed storage, to prevent impuritiesand water. According to the quality of oil, sometimes need to add demulsifier additive.

MORE
Gear oil additive package BF4201

Description

The agent has excellent extreme pressure anti-wear, anti-rust, anti-corrosion, excellent oxidation stability and significant energy savings properties. Under high-speed impact, could prevent gear abrasion, wear, pitting and spalling effectively; in high temperature, high load conditions, could prevent the formation of sludge to keep the tooth surface clean; in wet and water environment, could prevent corrosion of gear surfaces. Can be used to prepare different viscosity and quality of industrial gear oil and automotive gear oil.


Recommended Dosage

Middle load industrial gear oil

Heavy loadindustrial gear oil

GL-4 automotive gear oil

GL-5 automotive gear oil

1.2~1.5%

2.0%

2.2~2.5%

4.4~5.0%


Typical Characteristics


Item

Typical Value

Test Methods

Appearance

Red brown transparent liquid

Visual inspection

Density ,20℃,g/cm3                        

1.1-1.2

GB/T1884

Kinematic viscosity,(100℃),mm/s        

≥8

GB/T265

Flash points, (Open)℃                

≥100

GB/T207

Phosphorus content,%                    

≥2.2

SH/T0296

Sulfur content,%                     

≥26~30

SH/T0303

Nitrogen content,%                     

≥0.5

SH/T0224

Cu-strip Corrosion, rating(120℃,3h)     

≤1

GB/T5096

Mechanical impurities ,%                

≤0.05

GB/T511

Water,%

≤0.1

GB/T0225


Packing:The product is packed in 200 liter drum. (net weight: 200Kg/drum).

Storage:Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending.Keep the temperature not higher than 75°C. For long-term storage, the suggested temperature is lower than 45°C .

MORE
Heat transfer oils additive package BF7600

Description

BF7600 isdeveloped on the basis of comprehensive evaluation of thermal stability, oxidation stability and heat transfer of heat- transfer oil. This product can be widely used in various open and closed heat transfer systems.

Recommended dosage

Item

L-QB 280

L-QB 300

L-QB 320 

Dosage

0.3%

  0.5%

   0.7%


Typical Characteristics

Item

Typical Value

Test methods

Density(20℃)Kg/m3

870-920

GB/T1884

GB/T1885

Kinematic viscosity, mm2/s, at 100oC                  

15-25

GB/T265

Water %

≤0.1

GB/T260

Thermal stability

320°C,720h

SH/T0680

Appearance

Red brown oil liquid

Visual inspection


Packing and storage

Packing: The product is packed in 200 liter metal drum.

Storage: Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending. Keep the temperature not higher than 75°C. For long-term storage, the suggested temperature is lower than 45°C.

MORE
Engine oil additive package BF1500

Description

BF1500 engine oil additive package with high-performance and passed the bench test. It is formulated by metal detergent, ash-less dispersant and compound antioxidant. It has excellent high temperature detergency, dispersibility, anti-corrosion and anti-wear properties. The CF-4 grade diesel oil prepared by this product can meet the oil requirements of high-speed and four-stroke diesel engines, save fuel consumption and reduce piston deposits, and it is especially suitable for heavy-duty diesel locomotive driving on the expressway.

Use this additive package at 9.8% (m / m) dosage can adjust SAE30, 40,50,15W40, 20W40 viscosity grade of CF-4 or SJ / CF-4 level of engine oil , these engine oils were all meet the API CF-4 Diesel oil requirements. At the same time this product can be modulated SD / CC, CE, SF / CD, SG and other viscosity levels of engine oil.

Recommended Dosage

API Grade

Recommended Dosage(W%)

TBN

CF-4

9.8

10

SD/CC

4

/

CE

5.4

/

SF/CD

6

/

SG

8

/

SJ

11

/


Typical Characteristics

Item

Typical Value

Test Methods

Density(20℃),Kg/m3

Report

GB/T 1884

TBN㎎KOH/g                 

≥108

SH/T 0251

Water %                      

≤0.18

GB/T 260

Phosphorus content %(m/m)              

≥0.65

SH/T 0296

Sulfur content(m/m)              

≥1.92

GB/T 388

Cacontent %(m/m)             

≥4.2

SH/T 0270

Zn content %(m/m)             

≥0.88

SH/T 0226

N content %(m/m)              

≥0.46

SH/T 0224


Packing:The product is packed in 200 liter drum. (net weight: 200Kg/drum).

Storage:Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending.Keep the temperature not higher than 75°C. For long-term storage, the suggested temperature is lower than 45°C .

MORE
Diesel Engine Oil Additive Package For API CH-4 Grade

Description

The engine oil formulated with this product has excellent dispersibility, abrasion resistance, corrosion resistance and rust resistance. The API CH-4 with add this product  with  the viscosity level of 10W / 30, 10W / 40, 15W / 40 and 20W / 50. All pass the  MS program test and Ⅲ test bench

Recommended dosage

The reocommend dosage is 13.5% for the API CH-4.

Typical Characteristics

Item

Typical Value

Test methods

Flash point (open)   °C

≥180

GB/T267

Kinematic viscosity, mm2/s,at100oC           

Report

GB/T265

TBN      mg KOH/g

≥90

GB/T0251

Phosphorus     %(m/m)

≥0.6

SH/T0296

Nitrogen           %(m/m)

≥0.5

SH/T0224

Zinc                 %(m/m)

≥0.75

SH/T0226

Calcium           %(m/m)

≥3.0

SH/T0270


Packing and storage

Packing: The product is packed in 200 liter metal drum,net weight is 190Kg/Drum

Storage: Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending. Keep the temperature not higher than 75°C. For long-term storage, the suggested temperature is lower than 45°C.

MORE
友情链接:    大发彩票平台链接   mc赛车是国家开吗   V8彩票网注册   年年发棋牌官方正版下载   709彩票app