T104 Low Based Synthetic Calcium Sulfonate

Description

The product is a brownish-red liquid, prepared from the high boiling fraction synthetic phenylsulfonic acid. It provides the lubricant with good detergency, fine antirust performance and high-temperature stability. The product is used primarily for blending with high quality lubricating oil for internal combustion engine, especially to give a low-ash engine oil.

Application

It can be used to blend various grades of internal combustion engine oil, it with excellent detergency. This product can also be used to blend anti-rust oil.

Recommended dosage

The recommended dosage is  0.5% -3.0%.

Typical Characteristics

Item

Typical Value

Test methods

Kinematic Viscosity(100°C), mm2/s

≤150

GB/T265

TBN, mg KOH/g 

20-50

SH/T0251

Density , (15.6℃)Kg/m3

Report

GB/T2540

 Flash Point(Open Cup), °C

≥180

GB/T267

Calcium, m %,

≥2.0

SH/T0270

Sulfur, m%

≥2.0

SH/T388

Turbidity, JTU

≤150

SH/T0028


Packing and storage

Packing: The product is packed in 200 liter metal drum.

Storage: Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending. Keep the temperature not higher than 75°C. For long-term storage, the suggested temperature is lower than 45°C.

MORE
T106 Synthetic Calcium Sulfonate

Description

T106 is prepared from long-chain (C20-24) linear alkylbenzene sulfonic acid. It can provide lubricants with strong acid neutralizing ability, detergency & dispersion effects and antirust performance as well. It also has excellent stability at high temperature, oil solubility, antifoam, hydrolysis stability and water tolerance ability.

Application

It is generally can be used in engine oilstogetherwith antioxidant and dispersants. It can be used toblendvarious grades of internal combustion engine oil and can rust inhibitor for industrial lubricants.

Recommended dosage

The recommended dosage is  0.5% -3.0%.

Typical Characteristics

Item

Typical Value

Test methods

Density(20℃)㎏/m^3

1060-1140

GB/T2540

Chroma Number             

≤7.0

GB/T6540

Kinematic viscosity, mm2/s, at 100oC                  

≤200

GB/T265

Calcium, m%              

≥11.6

QJ/JSH738

Sulfur, m%

1.20-1.55

GB/T388

Oil-soluble spots test

Clean

QJ/JSH704

transparency

Transparent

Visual inspection

Turbidity, JTU             

≤250

QH/JSH735

TBN mg KOH/g            

≥295

QJ/JSH736


Packing and storage

Packing: The product is packed in 200 liter metal drum.

Storage: Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending. Keep the temperature not higher than 75°C. For long-term storage, the suggested temperature is lower than 45°C.

MORE
T115B Middle based Sulfurized Calcium Alkyl Phenate

Description

The product has the excellent high-temperature detergency and strong acid neutralization ability, antioxidant, anti-corrosion, anti-wear performance. It is of strong importance in the resistance to the carbon formation on the top ring of the piston, high soap content makes sure good maintaining ability in basicity. It also has the good watershed performance. This product has the good compatibility with sulfonates, alkyl salicylate, succinimide ashless agent. The product has the good synergistic effect with other additives. It is widely used for blending the marine cylinder oils and middle-grade and top-grade internal combustion engine oils.

Recommended dosage

The recommended dosage is  0.5~4.0%。

Typical Characteristics

Item

Typical Value

Test methods

Kinematic viscosity, mm2/s, at 100oC

Report

GB/T265

TBN  mg KOH/g

≥240

SH/T0251

Flash point(Open cup)℃

≥170

GB/T267

Calcium, m%

≥8.9

SH/T0297

Sulfur m %

2.9~3.8

SH/T0303

Turbidity, JTU

≤0.3

GB/T260


Packing and storage

Packing: The product is packed in 200 liter metal drum.

Storage: Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending. Keep the temperature not higher than 75°C. For long-term storage, the suggested temperature is lower than 45°C.

MORE
T154 Polyisobutylene Double Succimide

Description

T154 dispersant can efficiently boost the solubility of the high-temperature ash. With metallic detergent, T154 can solve the problem such as the low-temperature oil sludge of the engine, and can reduce the coatings and the deposition of carbon on the high-temperature parts. This product is primarily used for blending the top-grade internal combustion engine oils, it is generally used for the diesel oils.

Recommended dosage

The recommended dosage is  2.0~4.0%

Typical Characteristics


Item

Typical Value

Test methods

Appearance

Viscous transparent liquid

Visual inspection

Density , (20℃)Kg/m3

890-935

GB/T1885

Chroma (diluted), Number

≤7

GB/T6540

 Flash Point(Open Cup), °C         

≥170

GB/T267

Kinematic Viscosity(100°C), mm2/s

150-250

GB/T265

Mechanical impurities,m%             

≤0.08

GB/T511

Water,%                 

≤0.08

GB/T260

Nitrogen content,% 

1.1-1.3

SH/T0224

Chlorine content,%           

≤0.5

SH/T0161

TBN,mg  KOH/g

15-30

SH/T0251

Dispersibility,SDT             

≥45

    Attachment A


Packing and storage

Packing: The product is packed in 200 liter metal drum, net weight is 170Kg/Drum.

Storage: Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending. Keep the temperature not higher than 75°C. For long-term storage, the suggested temperature is lower than 45°C.

MORE
T202 Corrosion Inhibitors ZDDP

Description

T202 is an extremely potent, cost-effective antioxidant and corrosion inhibitor and deemed as the essential in today’s automotive lubricating oils. We could manufacture this product with higher Zinc content(that is average 8.5-10.0%) in accordance to our customers’ needs. T202 could provide the oils with excellent anti oxidation, anticorrosion performances and strong extreme pressure, anti-wear abilities. T202 can efficiently prevent the engine bearings from corrosion, and also prevent the viscosity of the oils from increasing due to the high-temperature oxidation. T202 is recommended for use in blending industrial lubricating oils such as gear oils, hydraulic oils, etc. It can be used for blending middle-grade engine oils combined with detergents and dispersants.

    

Recommended Dosage

The T202 generally recommended to blend lubricants are 0.5-3.0%


Typical Characteristics                                         

Item

Typical Value

Test Methods

Appearance

Yellow transparent liquid

Visual inspection

Chroma , No.        

≤2.5

GB/T6540

Density(20℃)Kg/m3

1080-1130

GB/T2540

Kinematic viscosity(100℃)mm/s^2

Report

GB/T265

Flash point(Open)℃  

≥180

GB/T3536

Sulfur content,%

12.0-18.0

SH/T0303

Phosphorus content,%

6.0-8.5

SH/T2960

Zinc content,%

8.0-10.0

SH/T0226

PH Value              

≥5.0

AttachmentA

Water content,% m/m   

≤0.09

GB/T260


Packing:The product is packed in 200 liter metal drum. (net weight: 200Kg/drum).

Storage:Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending.Keep the temperature not higher than 75°C. For long-term storage, the suggested temperature is lower than 45°C .

MORE
T203 Corrosion Inhibitors ZDDP

Description

T203 is an efficient antioxidant and corrosion inhibitor, belonging to the series of ZDDP products, and also deemed as essential in today’s automotive lubricating oils.T203 could provide the oils with excellentanti oxidation, anticorrosion performances and strong extreme pressure, anti-wear abilities. T203 has excellent thermal stability, oil solubility, and good compatibility with other additives, especially better demulsification performance compared with T202. T203 is recommended for use in formulating hydraulic oils with other components.T203 can be used for formulating high-grade diesel engine oils, especially for marine oil, diesel oil anti-wear hydraulic oil and other oil products.


Recommended Dosage

The T203 generally recommended to blend lubricants are0.5-3.0%


Typical Characteristics                                         

Item

Typical Value

Test Methods

Appearance

Yellow or light yellow transparent liquid

Visual inspection

Chroma , No.        

≤2.5

GB/T6540

Density(20℃)Kg/m3

1060-1150

GB/T2540

Kinematic viscosity(100℃)mm/s^2

Report

GB/T265

Flash point(Open)℃  

≥180

GB/T3536

Sulfur content,%

12.0-18.0

SH/T0303

Phosphorus content,%

6.5-8.8

SH/T2960

Zinc content,%

8.0-10.5

SH/T0226

PH Value              

≥5.3

AttachmentA

Water content,% m/m   

≤0.09

GB/T260


Packing:The product is packed in 200 liter metal drum. (net weight: 200Kg/drum).

Storage:Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending.Keep the temperature not higher than 75°C. For long-term storage, the suggested temperature is lower than 45°C .

MORE
T305 Extreme Pressure Anti wear Agent

Description

The product is a brownish red oily liquid, prepared from thiophosphoric acid. It provides the lubricant with fine extreme pressure anti-wear and friction improvement performance. It is used primarily for blending gear oils for medium/heavy load vehicles and medium/heavy load industry gear oils.


Recommended Dosage

The T305 generally recommended to blend lubricants are0.3-1.0%


Typical Characteristics  


Item

Typical Value

Test Methods

Appearance

Yellow transparent oily liquid

Visual inspection

Flash point(Open)℃ 

≥110

GB/T267

Phosphorus content,%             

≥5.5

SH/T0293

Sulfur content,%             

≥10

SH/T0303

Nitrogen content,%             

≥1.0

SH/T0224

Water content,% m/m           

≤0.1

GB/T260

Mechanical impurities, %m/m       

≤0.1

GB/T511

Oil Soluble Test

Dissolved、no separated layer

Visual inspection

Cu-strip Corrosion, rating(100℃,3h)

≤2b

GB/T5096

                                       

Packing:The product is packed in 200 liter metal drum. (net weight: 200Kg/drum).

Storage:Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending.Keep the temperature not higher than 75°C. For long-term storage, the suggested temperature is lower than 45°C .

MORE
第1/4页 共:23条 首页 下一页 尾页  跳转至
友情链接:    V8彩票网网址   V8彩票网网址   V8彩票网网址   大发彩票平台链接   V8国际登录网址